Anatomy, Head and Neck, Cervical Vertebrae


Article Author:
Joshua Kaiser


Article Editor:
Julian Lugo-Pico


Editors In Chief:
Brian Downs
Ziad Katrib


Managing Editors:
Avais Raja
Orawan Chaigasame
Khalid Alsayouri
Kyle Blair
Radia Jamil
Erin Hughes
Patrick Le
Anoosh Zafar Gondal
Saad Nazir
William Gossman
Hassam Zulfiqar
Navid Mahabadi
Hussain Sajjad
Steve Bhimji
Muhammad Hashmi
John Shell
Matthew Varacallo
Heba Mahdy
Ahmad Malik
Sarosh Vaqar
Mark Pellegrini
James Hughes
Beenish Sohail
Hajira Basit
Phillip Hynes
Sandeep Sekhon


Updated:
3/22/2019 5:46:32 PM

Introduction

The spine, or vertebral column, is a segmental set of 33 bones and associated soft tissues that comprise the subcranial portion of the axial skeleton. It subdivides into five regions based on curvature and morphology: the cervical, thoracic, and lumbar spine, the sacrum, and the coccyx.  There are seven, twelve, and five articulating vertebrae in the cervical, thoracic, and lumbar spine, respectively.  These three regions, while somewhat similar in terms of bone morphology, variably balance spinal rigidity with flexibility and movement, and articulate in a particular fashion that contributes to the overall S-shaped curvature of the spine.  Meanwhile, the sacrum and the coccyx are two sets of fused vertebrae at the caudal aspect of the spine that convey no motion.  Five fused vertebrae typically form the sacrum, with four forming the coccyx.

The cervical spine, comprised of seven cervical vertebrae referred to as C1 to C7, is divided into two major segments: the craniocervical junction (CCJ) and the subaxial spine. The CCJ includes the occiput and the two most cranial cervical vertebrae known as the atlas (C1) and the axis (C2). The subaxial spine includes the five most caudal cervical vertebrae (C3-C5). As a whole, the cervical spine is responsible for supporting the weight of the cranium and allowing motion of the head and neck. 

Structure and Function

The typical vertebrae have hallmark anatomic structures that are conserved across the cervical, thoracic, and lumbar regions.  Generally, each vertebra is comprised of a ventral vertebral body comprised of mostly trabecular cancellous and a denser, mostly cortical dorsal vertebral arch.  The vertebral body is the main site of intervertebral articulation and load-bearing.  Each vertebral body is linked to its cranial and caudal counterparts by an intervertebral disk.  The dorsal arch typically consists of a pair of pedicles arising from the dorsal vertebral body which unite dorsally by a pair of flat laminae.  The two laminae join at the midline producing a dorsal projection called the spinous process. The pedicles, laminae, and dorsum of the vertebral body form the vertebral foramen, a complete osseous ring that encloses the spinal cord. Its main role is to protect the spinal cord and its associated vascular structures.  Additionally, the transverse processes and the superior and inferior articular processes are present near the junction of the pedicles and the laminae. In the cervical spine, the costal process becomes the anterior part of the transverse process that encloses the vertebral artery foramen.[1]

Unique Features of the Cervical Spine

Despite displaying most of the typical vertebral hallmarks, a significant amount of anatomical variation exists within the cervical spine.  The main role of the cervical spine is to support and promote the movement of the head and neck.  Large vertebral bodies are not necessary considering the relatively small weight-bearing load at this level.  Thus, an increased range of motion takes priority over vertebral size and rigidity.  However, the additional motion and flexibility may carry an increased risk for injury of the spinal cord and its associated neurovascular structures. All seven cervical vertebrae have a transverse foramen within their transverse processes, where a pair of vertebral arteries travel cranially through the vertebrae starting at C6 before coursing medially over the arch of C1 towards the foramen magnum.  The spinous processes of the C2 to C6 vertebrae are bifid, C1 has a posterior tubercle instead of a spinous process, and C7 has a much larger and singular spinous process, known as the vertebra prominens, which is similar to those in the thoracic vertebrae.[2]

The Upper Cervical Spine – The Axis (C1) and the Atlas (C2)

The upper cervical region of the cervical spine includes C1 and C2, which are more commonly referred to as the atlas and the axis, respectively.  The main function of the atlas is to support and cradle the base of the occiput at the atlanto-occipital articulation.  As such, there are many features unique to the atlas not shared with the rest of the spine.  Most notably, the atlas lacks a vertebral body and instead forms a large ring-shaped fusion of anterior and posterior arches that allows C1 to accommodate the spinal cord as it exits the foramen magnum.  The atlas has pronounced concave and medially facing articular facets which accommodate the convex occipital condyles.  This morphology helps the joint contribute roughly fifty percent of flexion-extension of the neck but limit lateral displacement of the occiput.  These joints receive further stabilization from strong soft tissue ligaments that promote tight adherence to the occiput.[1][3] 

The axis, or C2, also possesses unique anatomical features.  Whereas the atlas is responsible for accommodating the occiput, the axis is the primary weight-bearing bone of the upper cervical region.  The hallmark feature is its odontoid process, or dens, which is a bony projection that extends cranially from the vertebral body.  It evolved from the body of the atlas and serves as the principal attachment point for the soft tissues that stabilize the atlanto-axial junction.  In contrast to the atlanto-occipital joint, the atlanto-axial junction is responsible for about fifty percent of the rotational motion of the cervical spine. The junction has three articulations: a midline atlanto-odontoid (or atlanto-dental) joint and a pair of atlanto-axial facet joints. The atlanto-odontoid joint permits the anterior arch of the atlas to pivot on the odontoid process. The lateral facet joints involve the articulation of the atlas’ inferior facets and the superior facets of the axis; these joints are fairly shallow to allow for significant motion.[1][2][3][4]

The Subaxial Cervical Spine – C3 to C7

All five vertebrae in this region share nearly identical morphological and functional features, and compared to the upper cervical spine, share most characteristics with the typical vertebral anatomy. Unique to these, all five vertebrae possess uncinate processes, which are bony prominences on the lateral edges of the vertebral body that articulate at Luschka joints to confer additional stability and prevent vertebral listhesis.[2]

There also exist some minor features of C7 that differentiate it from the rest of the subaxial region.  The transverse foramen of C7 is smaller in diameter in comparison to the rest of the region and typically do not house the vertebral arteries.  Instead, the vertebral arteries cross anteriorly to the transverse processes of C7 before proceeding cranially through the transverse foramina of C6.  Additionally, C7 is considered a transitional vertebra, and as such, has a spinous process and inferior facets that resemble thoracic vertebrae.  The vertebra also has a somewhat larger vertebral body.[5]

Embryology

The vertebral column derives from somites, part of the paraxial mesoderm.  More than forty pairs of somites develop in a craniocaudal fashion alongside the notochord during the process of body axis elongation.  Under the direction of local factors secreted by the notochord, neural tube, ectoderm, and visceral mesoderm, the somites rapidly undergo endothelial to mesenchymal transition (EMT) to form the sclerotome, dermatome, and myotome.  The vertebral column is ultimately derived from just the mesenchymal sclerotome, whereas the dermomyotome form muscle cells and overlying dermis.[6][7]

During the fourth week of embryogenesis, sclerotome cells quickly develop around the notochord and the neural tube, signifying the initiation of the true vertebral column and skull base development.  Under the direction of multiple factors produced by the notochord, segmentation of the column progresses.  Cells that will ultimately form the annulus fibrosis and nucleus pulposus of the intervertebral discs coalesce between collections of sclerotome cells, and aggregations of these sclerotome cells will later fuse to give rise to independent vertebrae by the sixth week of embryonic development. Subsequently, ossification begins at three main ossification centers in the individual vertebra and will progress to five ossification centers through the first year of life. The two secondary centers of ossification that develop later will contribute to the formation of the vertebral growth plate.[4][6][7]

The ossification centers of the odontoid process are particularly important since they are often misidentified as fractures in the pediatric population. The junction between the dens and the axis vertebral body does not fuse until around six years of age, whereas the secondary ossification centers appear around the age of three years old, and fuses to the cranial aspect of the dens by age twelve.[4]

Blood Supply and Lymphatics

Distal to their bifurcation from the subclavian arteries, the vertebral arteries course cranially to the base of the skull.  They progress past the C7 vertebrae anteriorly before entering the transverse foramen of C6.  After exiting the C2 transverse foramen, the arteries bend laterally to enter the more widely placed transverse foramen of C1 and then revert medially over the superior aspect of the arch of the atlas before entering the base of the skull.  Main tributaries of the vertebral arteries, the cervical radicular arteries, supply blood directly to the cervical vertebral bodies.[8]

Also located in the cervical spine region are the carotid arteries.  The right common carotid artery is a branch of the brachiocephalic artery, whereas the left common carotid arises directly from the aortic arch.  The common carotids then bifurcate into the internal and external carotids at the C3 vertebral level.  Despite their association with the neck, they do not perfuse any structures in the cervical spine.[8]

Nerves

The cervical spine functions as bony protection of the spinal cord as it exits the cranium.    Despite the presence of seven cervical vertebrae, there are eight pairs of cervical nerves, termed C1 to C8.  C1 through C7 exit the spine cranially to its associated vertebrae, while C8 exits caudally to C7. 

Direct innervation of the spinal column is highly complex, yet three discrete innervation sources have been identified in the ventral compartment of the cervical spine.  These include branches of the sympathetic trunk, the sympathetic rami communicantes, and the perineural vascular plexus of the vertebral arteries.  Meanwhile, the posterior aspect of the cervical spine receives innervation by the medial branch of the posterior primary rami.  Coursing through the intervertebral foramen with the vertebral arteries, the vertebral nerves are thought to supply additional sympathetic innervation.[9]

Muscles

The cervical vertebrae serve as the origination and insertion points for a host of muscles that support but also enable movement of the head and neck.  Posteriorly, the erector spine muscles of the deep back traverse the entire length of the spine and insert on the spinous and transverse processes of the upper thoracic and cervical vertebrae.  These muscles mostly provide postural support, but also assist in flexion and extension of the vertebral column.  The muscles of the posterior neck and suboccipital triangle are associated with the cervical vertebrae and enable the extension, rotation and lateral bending of the neck. The deep muscles of the anterior neck also originate at various landmarks of cervical vertebrae before attaching at the cranium or first or second ribs.  These muscles are responsible for neck flexion, rotation, lateral bending and stabilization of the skull.[3]

Physiologic Variants

During embryogenesis, vertebrae generally develop from three primary ossification centers: one in the centrum of the vertebral body and one in either vertebral arch.  However, during the first year of life, five ossification centers can be identified.  There is one located at either transverse process, one at the edge of the spinous process, and one at both the superior and inferior portion of the body.  The bone that is ossified from these five areas contributes to the development of growth plates.  Consequently, the absence or asymmetry of growth plate development can be a contributing factor to congenital defects of cervical vertebrae.[7]

Surgical Considerations

The cervical spine is in close proximity to many vital structures in the head and neck.  Most surgical interventions in the cervical spine are either performed via an anterior approach or a posterior midline approach.  The anterior approach to the cervical spine is used to expose vertebral bodies from C2 to T1.  It is indicated for anterior cervical diskectomy and fusion, corpectomy and fusion, cervical disk replacement, tumors resection, fracture, and infection.  Surgeon preference dictates the side of access.  A left-sided approach is often preferred since the recurrent laryngeal nerve demonstrates a less variable course compared to the right side, and injury to this nerve can result in vocal cord paralysis and hoarseness.  However, clinical significance remains controversial.  The superficial dissection either splits or transects the platysma muscle at the desired level. The sternocleidomastoid muscle is then identified and retracted laterally, protecting the carotid sheath and leaving the strap musculature medially. In this layer, careful dissection is important to avoid injury to the structures within the sheath. Deeply, the trachea and esophagus are retracted medially to allow access to the longus colli muscles.  The longus colli muscles are then divided longitudinally and retracted laterally, exposing the anterior longitudinal ligament that overlies the vertebral bodies and disks. Careful retractor placement and dissection is important to avoid injury to the trachea, esophagus and stellate ganglion, typically located around the lateral border of the longus colli muscles at the level of C6.  Injury of this sympathetic structure can result in Horner’s syndrome, characterized by ptosis, anhydrosis, miosis, enophthalmos, and loss of ciliospinal reflex on the side of injury.  Post-operative lateral x-ray of the cervical spine is vital in evaluating for any soft tissue swelling.   The soft tissue shadow anterior to the cervical spine should be less than 10mm at the level of C1, less than 5mm at C3, and less than 15 to 20mm at the level of C6.[1]

The posterior approach to the cervical spine uses a midline plane between the paraspinal musculature.  Adequate hemostasis and retractor placement during this approach are again important to minimize bleeding from the muscles. This approach allows access to the posterior elements of the cervical spine and is used for multiple procedures including laminectomy, laminoplasty, foraminotomy, and posterior cervical instrumentation. The particular anatomy of the cervical spine does not allow safe placement of pedicle screw fixation; this is primarily due to the pedicles of C3 to C6 being small and close to the vertebral arteries. Instead, lateral mass screw placement is preferred.  Careful placement of lateral mass screws often achieved with radiographic navigation, is recommended to decrease the risk of injury to the vertebral arteries.  Safe placement of pedicle screws is usually possible in C2 and C7. 

Fractures of the upper thoracic spine are most frequently accessed via a posterior approach.  The unique anatomy of this spinal segment begets particular risks that warrant consideration during surgical intervention.  During placement of lateral mass screws at the level of the atlas, dissection of the posterior arch should not involve more than 1.5cm of lateral exposure from midline to minimize the risk of injury to the vertebral arteries.  When placing C1 lateral mass screws, the screw should be angled 10 to 15 degrees medially to avoid the laterally coursing vertebral artery.[1]  Trans articular screw placement at the level of  C1-C2 also carries a risk of vertebral artery injury as the screw passes the pars interarticularis of C2. Meanwhile, C2 pedicle screw placement carries less risk of vertebral artery injury, but depending on screw length, it does confer some risk of internal carotid artery injury.  In cases that involve fusion of the upper cervical spine, it is imperative that the surgeon educated the patient about the risk for potential loss of half of the motion in the rotational and flexion-extension planes of the cervical spine.[1]

Clinical Significance

Relevant literature has shown that upwards of 10% of the adult population suffers from ”frequent” episodes of neck pain, described as at least three instances of pain in a year.  While this number alone would constitute far-reaching prevalence, it may be a conservative estimate.  Other studies have found the prevalence of neck pain to be the fourth leading cause of global disability, with an annual prevalence rate neck pain has as high as 30%.  As such, neck pain presents as a significant socioeconomic burden.  It is often classified based on duration (acute, subacute, or chronic) or mechanistically (mechanical, neuropathic, or referred).  Neck pain may also come about secondary to rheumatologic conditions.[2][10]

Acute neck pain often arises from trauma or sports injury.  Ensuring the stability of the cervical spine is paramount to prevent any further deleterious consequences.  In the upper cervical spine, a wide range of pathology can result, including fractures of the occipital condyle, the atlas, and the dens or atlas of C2.  Other diagnoses include dislocations involving the craniocervical and atlanto-axial junctions.  Likewise in the subaxial cervical spine, there is a similarly wide variety of acute-injury pathology.  Regardless of location, the specific characteristics of cervical spine injury dictate its management and treatment.  Missed or incorrect diagnoses can have serious long-term costs given the high neurological stakes.  Thus, cross-table radiography and CT are invaluable tools for assessing fractures or altered spatial relationships between vertebrae, whereas MRI is preferable in cases involving potential spinal cord and soft tissue injury.[10][11]

Subacute and chronic neck pain also share diverse etiology.  Arthritis of cervical facet joints is a common cause of mechanical neck pain.  Meanwhile, nerve root compression, intervertebral disk herniation, and spinal stenosis are the most frequent originators of peripheral neuropathic neck pain.  A comprehensive history and physical examination can assist in differentiating between neuropathic and mechanical neck pain.  In some cases, patients may benefit from diagnostic imaging and further work-up to generate a proper diagnosis and treatment plan.[10]


Interested in Participating?

We are looking for contributors to author, edit, and peer review our vast library of review articles and multiple choice questions. In as little as 2-3 hours you can make a significant contribution to your specialty. In return for a small amount of your time, you will receive free access to all content and you will be published as an author or editor in eBooks, apps, online CME/CE activities, and an online Learning Management System for students, teachers, and program directors that allows access to review materials in over 500 specialties.

Improve Content - Become an Author or Editor

This is an academic project designed to provide inexpensive peer-reviewed Apps, eBooks, and very soon an online CME/CE system to help students identify weaknesses and improve knowledge. We would like you to consider being an author or editor. Please click here to learn more. Thank you for you for your interest, the StatPearls Publishing Editorial Team.

Anatomy, Head and Neck, Cervical Vertebrae - Questions

Take a quiz of the questions on this article.

Take Quiz
What is the normal upper limit in adults of prevertebral soft tissue swelling at the C4 region?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
For which one of the following is the carotid or Chassaignac's tubercle is an important landmark?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
Following surgical intervention with an anterior cervical discectomy and fusion, a 56-year-old female notices drooping of her right eyelid, dry skin, and a smaller right pupil compared to her left eye. What is the most likely cause of this condition?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
A 65-year-old male sustained a fracture of the atlas during a motor vehicle accident. The patient is stabilized in the emergency department and is scheduled for a posterior instrumented fusion between the C1 and C2 vertebrae. Which of the following will decrease the risk of vertebral artery injury?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
A 58-year-old male who sustained traumatic fractures to the upper cervical spine following a motor vehicle accident. After a detailed evaluation of the fracture characteristics and imaging studies, you recommend posterior instrumentation and fusion from the occiput to C2. The patient asks you how would this affect his range of motion. You should inform him that he would probably experience which one of the following?

(Move Mouse on Image to Enlarge)
  • Image 6224 Not availableImage 6224 Not available
    Richard Menger MD MPA and Anthony Sin MD
Attributed To: Richard Menger MD MPA and Anthony Sin MD



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
A 37-year-old male with a history of rheumatoid arthritis presents to the clinic complaining of neck pain. The patient is diagnosed with cervical subluxation secondary to rheumatoid arthritis. Which joint in the neck has concave and medially facing articular facets?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up

Anatomy, Head and Neck, Cervical Vertebrae - References

References

Hsu WK, Advanced techniques in cervical spine surgery. The Journal of bone and joint surgery. American volume. 2011 Apr 20;     [PubMed]
Bland JH,Boushey DR, Anatomy and physiology of the cervical spine. Seminars in arthritis and rheumatism. 1990 Aug;     [PubMed]
Bogduk N,Mercer S, Biomechanics of the cervical spine. I: Normal kinematics. Clinical biomechanics (Bristol, Avon). 2000 Nov;     [PubMed]
O'Brien WT Sr,Shen P,Lee P, The Dens: Normal Development, Developmental Variants and Anomalies, and Traumatic Injuries. Journal of clinical imaging science. 2015;     [PubMed]
Takeuchi M,Aoyama M,Wakao N,Tawada Y,Kamiya M,Osuka K,Matsuo N,Takayasu M, Prevalence of C7 level anomalies at the C7 level: an important landmark for cervical nerve ultrasonography. Acta radiologica (Stockholm, Sweden : 1987). 2016 Mar;     [PubMed]
Scaal M, Early development of the vertebral column. Seminars in cell     [PubMed]
Kaplan KM,Spivak JM,Bendo JA, Embryology of the spine and associated congenital abnormalities. The spine journal : official journal of the North American Spine Society. 2005 Sep-Oct;     [PubMed]
Prince EA,Ahn SH, Basic vascular neuroanatomy of the brain and spine: what the general interventional radiologist needs to know. Seminars in interventional radiology. 2013 Sep;     [PubMed]
Johnson GM, The sensory and sympathetic nerve supply within the cervical spine: review of recent observations. Manual therapy. 2004 May;     [PubMed]
Cohen SP, Epidemiology, diagnosis, and treatment of neck pain. Mayo Clinic proceedings. 2015 Feb;     [PubMed]
Bransford RJ,Alton TB,Patel AR,Bellabarba C, Upper cervical spine trauma. The Journal of the American Academy of Orthopaedic Surgeons. 2014 Nov;     [PubMed]

Disclaimer

The intent of StatPearls is to provide practice questions and explanations to assist you in identifying and resolving knowledge deficits. These questions and explanations are not intended to be a source of the knowledge base of all of medicine, nor is it intended to be a board or certification review of Surgery-Facial Plastics. The authors or editors do not warrant the information is complete or accurate. The reader is encouraged to verify each answer and explanation in several references. All drug indications and dosages should be verified before administration.

StatPearls offers the most comprehensive database of free multiple-choice questions with explanations and short review chapters ever developed. This system helps physicians, medical students, dentists, nurses, pharmacists, and allied health professionals identify education deficits and learn new concepts. StatPearls is not a board or certification review system for Surgery-Facial Plastics, it is a learning system that you can use to help improve your knowledge base of medicine for life-long learning. StatPearls will help you identify your weaknesses so that when you are ready to study for a board or certification exam in Surgery-Facial Plastics, you will already be prepared.

Our content is updated continuously through a multi-step peer review process that will help you be prepared and review for a thorough knowledge of Surgery-Facial Plastics. When it is time for the Surgery-Facial Plastics board and certification exam, you will already be ready. Besides online study quizzes, we also publish our peer-reviewed content in eBooks and mobile Apps. We also offer inexpensive CME/CE, so our content can be used to attain education credits while you study Surgery-Facial Plastics.