Poly-L-Lactic Acid


Article Author:
Christine Sickles


Article Editor:
Gary Gross


Editors In Chief:
Amanda Oakley
Jules Lipoff
Shyam Verma


Managing Editors:
Orawan Chaigasame
Carrie Smith
Abdul Waheed
Frank Smeeks
Kristina Soman-Faulkner
Benjamin Eovaldi
Radia Jamil
Sobhan Daneshfar
Saad Nazir
William Gossman
Pritesh Sheth
Hassam Zulfiqar
Navid Mahabadi
Steve Bhimji
John Shell
Matthew Varacallo
Ahmad Malik
Mark Pellegrini
James Hughes
Beata Beatty
Hajira Basit
Phillip Hynes


Updated:
1/23/2019 2:26:12 PM

Indications

Poly-L-lactic acid is an absorbable, semi-permanent, injectable implant that can be used to restore volume and stimulate collagen formation gradually. It is FDA-approved for the correction of facial fat loss associated with antiretroviral therapy-induced lipoatrophy in HIV patients. It is FDA-approved for use in immunocompetent people for the correction of nasolabial fold deficiencies and other facial wrinkles. It has been used off-label to enhance the cheeks, hands, neck, thighs, gluteal enhancement and chest wall deformities, such as pectus excavatum or thoracic deformities secondary to surgical procedures. Poly-L-lactic acid has been reported to improve “step off” chest wall deformities after mastectomy and implant reconstruction, suggesting that this product can also help improve breast abnormalities. For maximal correction, a series of injections is recommended at 3 to 6-week intervals. The degree of lipoatrophy correction is based on the number of sessions, not the volume injected at each session.[1][2][3]

Mechanism of Action

Injection of poly-L-lactic acid in the deep dermis or subcutaneous tissue may cause an immediate augmentation of the treated tissue. This is a temporary but immediate response that is due to tissue edema and fluid from the reconstitution of the product. It will resolve within 2 to 3 days after injection. Once the carrier substance is absorbed, the poly-L-lactic acid particles induce an inflammatory response through phagocytosis by tissue macrophages. This is a similar process to suture reabsorption in the skin. The inflammatory response breaks down the poly-L-lactic acid into lactic acid monomers and is then metabolized to carbon dioxide and water while stimulating the production of new collagen type-I fibers in the skin. Approximately half of the product is digested within 6 months. The duration of action is 12 to 24 months.[4][5][6]

Administration

Poly-L-lactic acid is microparticles of lyophilized, alpha-hydroxy acid polymers that are similar in structure to the polyglactin 910 suture material that comes in powder form. Poly-L-lactic acid comes in a carton containing 2 vials. Each vial contains 367.5 g of product and is reconstituted with 4 mL of sterile water and 1 mL of lidocaine, producing a 5 mL suspension of 4.45% poly-L-lactic acid. Higher dilution volumes can be used. Once diluted, it should be allowed to stand undisturbed for 2 to 4 hours and swirled immediately before injection to ensure an even suspension of particles. Some injectors recommend dilution 24 to 72 hours before injection to allow appropriate saturation of the powder. The product does not require refrigeration once reconstituted. The poly-L-lactic acid is placed into the deep dermis or subcutaneous tissue using a 26-gauge needle, roughly one vial per side of the face. Various injection techniques can be used including linear threading, depot injection in small volumes and cross-hatching. Massage should be performed during and after the injection to ensure an even distribution of the material. The patient should apply ice packs to the treatment areas to reduce erythema and swelling.[7][8][9][10]

Adverse Effects

Acute injection site reaction is the most common adverse effect of this product. This can manifest as erythema, swelling, or bruising that can take up to a week to heal. This risk increases if the patient is taking a blood thinning agent, such as aspirin, warfarin, clopidogrel, apixaban, rivaroxaban, and dabigatran. Clinicians should carefully review the patient’s medication list and counsel them regarding the increased risk.

Poly-L-lactic acid is a foreign substance. Therefore, it carries the risk of a hypersensitivity reaction upon injection in the skin. Patients should remove all makeup, and the skin should be adequately prepped before injection to minimize the introduction of additional foreign particles. Skin testing can be performed prior to treatment.

Post-treatment nodules with granuloma formation can occur with an injection of this product. The risk is thought to be due to lower dilution volumes, and studies have shown that a decreased risk exists when dilution of volumes of 7 mL or more are used. Post-injection massage recommended to be performed for 5 minutes at a time, 5 times a day for 5 days after injection, has been anecdotally recommended to help minimize the occurrence of the nodules. Injectors can also place smaller aliquots of the product deeper in the skin to help minimize this risk. Several treatments can be initiated if the patient experiences nodule formation. Early onset lesions can be treated with subcision or injected with sterile water. Later onset nodules can be treated with intralesional triamcinolone up to 40 mg/mL or 5-fluorouracil 2% or 5% in combination with a low-dose oral tetracycline antibiotic. There are some reports that oral prednisone may be used to help suppress the formation of nodules.

Inappropriate placement of this product in the skin can lead to lumpiness or visibility of the filler through the skin. Post-treatment massage to the area can help decrease this risk.

Post-procedural infection is rare but can occur. The skin should be prepped with an antiseptic, such as alcohol followed by chlorhexidine or chloroxylenol. Some injectors inquire about a history of HSV and provide adequate prophylaxis of antivirals up to 2 days before and 2 days after treatment if augmentation is performed on or around the lip. 

The most feared complication of an injectable product is skin necrosis due to cannulation of the product into a vessel with subsequent embolization or compression of a vessel from excessive volume. Injectors should have a thorough understanding of the treatment area anatomy and be aware of any potential dangers zones. Injection of low volumes over multiple treatment sessions should be used whenever possible. Aspiration should be performed before injecting the product into the tissue. In the event of a vascular compromise, methods to promote vasodilation should be employed. The area should be treated with a warm compress and topical nitroglycerin to promote vasodilation.

Contraindications

Absolute contraindication to treatment is a known allergy to poly-L-lactic acid or any of its components. Injection should not be performed if there is an active infection in the treatment area.

Monitoring

All patient should be assessed prior to treatment for facial asymmetry and volume differences. It is also important to document any preexisting scars and inquire about a history of keloid formation. All patients should receive baseline photographs and return for assessment 2 to 4 weeks after injection. Patients should be advised to avoid any unnecessary herbal medications and supplements to decrease the risk of bruising. Anticoagulants should not be discontinued.

Toxicity

There is no antidote to dissolve poly-L-lactic acid. In the event of a vascular compromise, methods to promote vasodilation should be employed. The area should be treated with warm compresses and topical nitroglycerin to promote vasodilation.

Enhancing Healthcare Team Outcomes

Poly-L-lactic acid is an absorbable, semi-permanent, injectable implant that can be used to restore volume and stimulate collagen formation gradually. It is FDA-approved for the correction of facial fat loss associated with antiretroviral therapy-induced lipoatrophy in HIV patients. While this dermal filler is usually only injected by dermatologists and plastic surgeons, primary care providers and nurse practitioners should know which patient may benefit from poly-L-lactic acid. Patients need to be educated about its side effects, potential complications and durability.


Interested in Participating?

We are looking for contributors to author, edit, and peer review our vast library of review articles and multiple choice questions. In as little as 2-3 hours you can make a significant contribution to your specialty. In return for a small amount of your time, you will receive free access to all content and you will be published as an author or editor in eBooks, apps, online CME/CE activities, and an online Learning Management System for students, teachers, and program directors that allows access to review materials in over 500 specialties.

Improve Content - Become an Author or Editor

This is an academic project designed to provide inexpensive peer-reviewed Apps, eBooks, and very soon an online CME/CE system to help students identify weaknesses and improve knowledge. We would like you to consider being an author or editor. Please click here to learn more. Thank you for you for your interest, the StatPearls Publishing Editorial Team.

Poly-L-Lactic Acid - Questions

Take a quiz of the questions on this article.

Take Quiz
Which of the following medications is FDA approved for use in the treatment of lipodystrophy in HIV positive patients?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
Which of the following conditions is an FDA approved indication for treatment with poly-L-lactic acid?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
How does poly-L-lactic acid results in delayed tissue augmentation?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
Poly-L-lactic acid is FDA approved for treatment of which of the following conditions?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up
Which of the following is the most common potential complication of treatment with poly-L-lactic acid?



Click Your Answer Below


Would you like to access teaching points and more information on this topic?

Improve Content - Become an Author or Editor and get free access to the entire database, free eBooks, as well as free CME/CE as it becomes available. If interested, please click on "Sign Up" to register.

Purchase- Want immediate access to questions, answers, and teaching points? They can be purchased above at Apps and eBooks.


Sign Up

Poly-L-Lactic Acid - References

References

Lai Y,Li Y,Cao H,Long J,Wang X,Li L,Li C,Jia Q,Teng B,Tang T,Peng J,Eglin D,Alini M,Grijpma DW,Richards G,Qin L, Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect. Biomaterials. 2019 Jan 7;     [PubMed]
Ibrahim O,Ionta S,Depina J,Petrell K,Arndt KA,Dover JS, Safety of Laser-Assisted Delivery of Topical Poly-L-Lactic Acid in the Treatment of Upper Lip Rhytides: A Prospective, Rater-Blinded Study. Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.]. 2019 Jan 2;     [PubMed]
Alam M,Tung R, Injection technique in neurotoxins and fillers: Indications, products, and outcomes. Journal of the American Academy of Dermatology. 2018 Sep;     [PubMed]
Herrmann JL,Hoffmann RK,Ward CE,Schulman JM,Grekin RC, Biochemistry, Physiology, and Tissue Interactions of Contemporary Biodegradable Injectable Dermal Fillers. Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.]. 2018 Nov;     [PubMed]
Hotta TA, Attention to Infection Prevention in Medical Aesthetic Clinics. Plastic surgical nursing : official journal of the American Society of Plastic and Reconstructive Surgical Nurses. 2018 Jan/Mar;     [PubMed]
Pascali M,Quarato D,Carinci F, Filling Procedures for Lip and Perioral Rejuvenation: A Systematic Review. Rejuvenation research. 2018 Dec;     [PubMed]
Fallacara A,Manfredini S,Durini E,Vertuani S, Hyaluronic Acid Fillers in Soft Tissue Regeneration. Facial plastic surgery : FPS. 2017 Feb;     [PubMed]
Winslow C, Filling the Midface: Injectables. Facial plastic surgery : FPS. 2016 Oct;     [PubMed]
Sadick NS,Arruda S, The Use of Poly-L-Lactic Acid in the Abdominal Area. Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.]. 2017 Feb;     [PubMed]
Lee JC,Lorenc ZP, Synthetic Fillers for Facial Rejuvenation. Clinics in plastic surgery. 2016 Jul;     [PubMed]

Disclaimer

The intent of StatPearls is to provide practice questions and explanations to assist you in identifying and resolving knowledge deficits. These questions and explanations are not intended to be a source of the knowledge base of all of medicine, nor is it intended to be a board or certification review of Dermatology. The authors or editors do not warrant the information is complete or accurate. The reader is encouraged to verify each answer and explanation in several references. All drug indications and dosages should be verified before administration.

StatPearls offers the most comprehensive database of free multiple-choice questions with explanations and short review chapters ever developed. This system helps physicians, medical students, dentists, nurses, pharmacists, and allied health professionals identify education deficits and learn new concepts. StatPearls is not a board or certification review system for Dermatology, it is a learning system that you can use to help improve your knowledge base of medicine for life-long learning. StatPearls will help you identify your weaknesses so that when you are ready to study for a board or certification exam in Dermatology, you will already be prepared.

Our content is updated continuously through a multi-step peer review process that will help you be prepared and review for a thorough knowledge of Dermatology. When it is time for the Dermatology board and certification exam, you will already be ready. Besides online study quizzes, we also publish our peer-reviewed content in eBooks and mobile Apps. We also offer inexpensive CME/CE, so our content can be used to attain education credits while you study Dermatology.